Creating harmony in the middle of heavy foot or vehicle traffic is fairly tough, particularly if you own a commercial building. This is often a problem in shopping centers, restaurants, or other crowded places, which is why certain regulations are important for a more organised operation. But aside from these rules, it is additionally important that you give people some visual signs of what these rules are, by means of stainless-steel bollards so people will be made aware there are rules to be followed.

Bollards in Public Places – Bollards are generally found in public areas, and you can find parking bollards in streets with heavy traffic or before buildings that require protection from vehicles. Some are even used rather than cycle racks. Others would even allow these bikes to get locked for security purposes.

When bollards are installed, it is mainly to strengthen safety. They are visual indicators that no unauthorised person is permitted to enter an area, which can be often signified with the help of a chain connecting the bollards. Because of this folks are prohibited to get into the area which is cordoned with bollards.

All steel bollards are galvanised to BS EN ISO 1461 and possess the choice of powder coating for any BS or RAL colour. Mild steel tube can be found in varying thicknesses 60mm up to 114mm diameter use a 3mm thick wall. Diameters above this are 5mm thick as standard. Mild steel tube comes in larger wall thicknesses to provide the best safety barriers.

Of very low maintenance, steel requires only occasional cleaning with tepid to warm water and soap or a mild detergent. In heavy industrial areas or regions of a very high volume of traffic bollards might be subject to more deposits, to be able to retain the desired finish a more frequent maintenance programme is usually recommended.

1-800-BOLLARDS

Areas requiring vehicle access during the day and require a safe and sound area at night can utilise a telescopic bollard. The bollards have a light lifting weight, approximately 15kgs, and retract to ground level permitting continued vehicle access. Once the bollard is lifted and locked in install it provides high security to the area, this design can be manufactured in a thicker steel wall to provide anti ram resistance.

There are many materials employed to make bollards. It can be stone, concrete or steel. Concrete bollards are permanently installed while steel bollards can be purchased with extra features, like being sound sensitive or automated. Fixed bollards have light reflectors to allow people know where they are located, specially the drivers. With no reflectors, they could easily cause accidents to take place within the streets.

Installing bollards, whether they are used as an alternative for a bike stand or not, depends on which kind of bollards you might have chosen. Fixed bollards must be installed into concrete or with new foundations. Factors miecfq since the soil condition and design need to be carefully examined at first.

On the other hand, removable or manufactured bollards often have their mounting systems. Even if they have to become mounted by themselves, no drilling is essential to install these types of bollards. They don’t must be glued to the ground either with epoxy or similar materials.

Retractable bollards are also available. At first glance, they may seem like layered telescopes that can be used with manual or automatic features, according to your choice. Manual bollards have to be lifted with the aid of lift-assistance mechanisms while automated bollards use hydraulics and electricity.

Leave a Reply

Your email address will not be published. Required fields are marked *